Sip - ATCOM AT800D User Manual

AT800 Series User Manual
SIP
User ID‐‐‐User name of SIP account
Password‐‐‐Password of SIP account
SIP Server‐‐‐ SIP server address, support both IP address and domain name.
SIP port‐‐‐SIP server port, default is 5060
SIP Redundancy Server‐‐‐SIP redundancy server address, support both IP address and domain
name. It can be configured manually and also can be auto configured as the server address
carried in the DNS SRV record if there is a DNS which supports specifying the location of the
server or domain for SIP protocol. Only when AT800 fails to register to the SIP Server, it will
try to register to the SIP Redundancy Server.
Use Outbound Proxy‐‐‐Enable an outbound proxy. If set to no, the outbound proxy field is
ignored. Defaults to no.
Outbound proxy Server‐‐‐SIP outbound proxy server where all outbound requests are sent to.
Outbound proxy port‐‐‐the port of the outbound proxy server
Register expires‐‐‐ SIP Register interval time. Default is 300s.
Transport type‐‐‐Select from UDP, TCP, or TLS. Default is UDP.
SIP 100rel require‐‐‐To enable the support of 100REL SIP extension for reliable transmission of
provisional response and use of PRACK requests, select yes, Otherwise, select no. Default is
set to no.
Session Timer Enable‐‐‐ Whether to enable session timer extension for this account. Default is
no.
Early Update Enable---This parameter control the account to support receiving Early Update.
Caller ID Display---This parameter is used to supported the P‐Asserted‐Identity header.
AutoSubscribeMWI Enable---Enable this account to subscribe for message summary
automatically.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn