Codec Configuration - ATCOM AT800D User Manual

AT800 Series User Manual
Server List---The SIP server list supported, can be common and Broadsoft, default to common.
DNS mode---Enable the account to use DNS SRV query. Default to no which use DNS A query.
BLF List URI---the Broadworks BLF uri to request.
Codec Configuration
G711A---Enable or disable G711A codec support in this account.
G711U---Enable or disable G711U codec support in this account.
AVT---Enable or disable AVT codec support in this account.
G722---Enable or disable G722 codec support in this account.
G723---Enable or disable G723 codec support in this account.
G729ab‐‐‐Enable or disable G729ab codec support in this account.
iLBC---Enable or disable iLBC codec support in this account.
G726‐16---Enable or disable G726‐16 codec support in this account.
G726‐24---Enable or disable G726‐24 codec support in this account.
G726‐32---Enable or disable G726‐32 codec support in this account.
G726‐40---Enable or disable G726‐40 codec support in this account.
Prefer codec‐‐‐preferred codec for all calls. (The actual codec used in a call still depends on the
outcome of the codec negotiation protocol.). Which can be one of: G711u, G711a, G729, G722,
G723, G726‐16, G726‐24, G726‐32, G726‐40, Lin16‐16, iLBC. Defaults to G711u.
User Prefer codec Only‐‐‐Choose yes to use only the prefer codec for all calls. (The call fails if
the far end does not support this codec.) Select no, the phone will contains all the codec
G.711A/u, G.722, G.723, G.726‐16, G.726‐24, G.726‐32, G.726‐40, G.729, iLBC, Lin‐16 in SDP.
Defaults to no.
DTMF Tx Method‐‐‐select the method to transmit DTMF signals to the far end: Inband, rfc2833,
INFO. Defaults to RFC2833.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn