ATCOM AT800D Quick Start Manual
Hide thumbs
Also See for AT800D:
- User manual (43 pages) ,
- Quick start manual (7 pages) ,
- Quick manual (2 pages)
Related Manuals for ATCOM AT800D
Summary of Contents for ATCOM AT800D
- Page 1 AT800D Quick Start Guide AT800D AT800D AT800D Quick Quick Quick Start Start Start Guide Guide Guide AT800D Quick Start Guide AT800D Quick Start Guide AT800D AT800D Quick Quick Start Start Guide Guide Version 1.0 2013-01-15 ATCOM TECHNOLOGY CO., LIMITED...
-
Page 2: Table Of Contents
Guide Guide Catalog Catalog Catalog Catalog 1、Installation and access......................3 1.1 Power on........................3 1.2 Connect to network......................3 2、Configure AT800D to make VoIP calls.................. 4 2.1 LAN Config........................4 2.2 SIP Config ........................5 3、Login indicator........................7 ATCOM TECHNOLOGY CO., LIMITED... -
Page 3: Installation And Access
Then press <OK> key to enter menu settings. Check your IP address at option 9.Network�2.Current IP. 2. Modify IP address of your PC to be in the same network as AT800D. 3. Inputting AT800D IP address at browser and pressing enter key can access the web interface of AT800D.Default is in user login, and you can... -
Page 4: Lan Config
(DHCP) and PPPoE. You can use either of these IP types to connect the internet. DHCP: Use DHCP: DHCP: DHCP: ----Select DHCP If you have a DHCP server in your network, AT800D will automatically obtain the network information from your DHCP server. Use Static Static Static Static IP: IP: IP: ----Select “Static”;... - Page 5 ----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server (option), Username and password. Then connect AT800D to the Ethernet port of the modem, it will connect to the internet through PPPoE, and automatically obtain the IP address, Subnet Mask, Default Gateway, Primary DNS and Secondary DNS information.
- Page 6 2. After the restart, it will enter idle status and LCD will show like following: 3. Press <Login> button, input phone number at <Username>, input password at <Password>. And then pressing <OK> key to confirm and start registering. ATCOM TECHNOLOGY CO., LIMITED...
-
Page 7: Login Indicator
A A A A T T T T 800D 800D 800D 800D status status status status Red/flashing LAN Disconnected Red/stable SIP unregister SIP register ok Then you can make calls when the LAN and SIP config are correct. AT800D just supports headset calls. ATCOM TECHNOLOGY CO., LIMITED...
Need help?
Do you have a question about the AT800D and is the answer not in the manual?
Questions and answers