Nat Support Parameters; Account Settings - ATCOM AT800D User Manual

AT800 Series User Manual
3. G726r 16 Dynamic Payload‐‐‐G726r 16 dynamic payload type. Defaults to 108
4. G726r 24 Dynamic Payload‐‐‐G726r 24 dynamic payload type. Defaults to 97
5. G726r 32 Dynamic Payload‐‐‐G726r 32 dynamic payload type. Defaults to 2
6. G726r 40 Dynamic Payload‐‐‐G726r 40 dynamic payload type. Defaults to 96
7. iLBC Dynamic Payload‐‐‐iLBC dynamic payload type. Defaults to 98
8. iLBC Mode‐‐‐iLBC codec code rate, which can be 13.3kbit/s, 15.2kbit/s
9. Lin16‐16 Dynamic Payload‐‐‐Lin16‐16 dynamic payload type, defaults to 102
10. G711a Codec Name‐‐‐G711a codec name used in SDP, defaults to PCMA
11. G711u Codec Name‐‐‐G711u codec name used in SDP, defaults to PCMU
12. AVT Codec Name‐‐‐AVT codec name used in SDP, defaults to telephone‐event
13. G722 Codec Name‐‐‐G722 codec name used in SDP, defaults to G722
14. G723 Codec Name‐‐‐G723 codec name used in SDP, defaults to G723
15. G723 Mode‐‐‐G723 codec code rate, which can be 6.3kbit/s, 5.3kbit/s
16. G729ab Codec Name‐‐‐G729ab codec name used in SDP, defaults to G729
17. G726‐16 Codec Name‐‐‐G726‐16 codec name used in SDP, defaults to G72616
18. G726‐24 Codec Name‐‐‐G726‐24 codec name used in SDP, defaults to G72624
19. G726‐32 Codec Name‐‐‐G726‐32 codec name used in SDP, defaults to G72632
20. G726‐40 Codec Name‐‐‐G726‐40 codec name used in SDP, defaults to G72640
21. iLBC Codec Name‐‐‐iLBC codec name used in SDP, defaults to iLBC
22. Lin16‐16 Codec Name‐‐‐Lin16‐16 codec name used in SDP, defaults to L16
NAT Support Parameters
1. Enable Stun: yes/no‐‐‐enable or disable STUN
2. Stun Server‐‐‐the stun server, which can be URI or IP address.
After finishing the configuration in this page, click submit to save changes, and the phone will reboot
automatically.
Account Settings
To configure the account parameters:
Log in to the web administrator interface
Click admin button
Click account menu
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn