Microscan N2210WZ Owner's Manual page 354

Serial Commands
Diagnostics
High Temperature Threshold
Low Temperature Threshold
Counts (Read-only)
Hours Since Reset (Read-only)
Service Message
Laser Current Warning Message
User-Defined Name
High Temperature Threshold
Serial Cmd: <K402,status,message>
Default: 0 = Disabled
Options: 0 = Disabled
Message
Serial Cmd: <K402,status,message>
Default: HIGH_TEMP
Options: Any valid ASCII string up to 128 characters
Low Temperature Threshold
Serial Cmd: <K403,status,message>
Default: 0 = Disabled
Options: 0 = Disabled
Message
Serial Cmd: <K403,status,message>
Default: LOW_TEMP
Options: Any valid ASCII string up to 128 characters
Counts (Read-only)
Power-On
Serial Cmd: <K406,power-on,resets,power-on saves,power-on flash saves>
16-bit counter that increments on scanner power-on.
Resets
Serial Cmd: <K406,power-on,resets,power-on saves,power-on flash saves>
16-bit counter that increments on scanner reset. Value is reset on power-on.
A-68
<K402,status,message>
<K403,status,message>
<K406> (returns: power-on,resets, power-on saves,custom default
saves)
<K407> (returns: hours,minutes)
<K409,status,service message, threshold,resolution>
<K411,laser high status,laser high message,laser low status,
laser low message>
<K412,user-defined name>
1 = Enabled
1 = Enabled
QX-870 Industrial Raster Scanner User's Manual