Microscan N2210WZ Owner's Manual page 285

Parameter Menu
The user then selects B to configure the Fixed Symbol Length Status parameter.
===========================[CODE 128]============================
A) Code 128 Status
B) Fixed Symbol Length Status
C) Symbol Length
D) EAN-128 Status
E) Output Format
F) Application Record Separator Status
G) Application Record Separator Character =
H) Application Record Brackets
I) Application Record Padding
-- PLEASE PRESS A-I TO EDIT, 1=MAIN MENU, 2=PREVIOUS MENU, ESC TO EXIT
Parameter Options Menu
At this level, the current setting and system default are both shown. The user can select
the desired option and go back to the previous menu, or press Enter or ESC to return to
the previous menu without any change to the parameter.
==================[Fixed Symbol Length Status]===================
A) DISABLE [CURRENT] [DEFAULT]
B) ENABLE
-- PLEASE PRESS A-B TO CHANGE THE PARAMENTER, ESC TO CANCEL
Another example of a Parameter Options-level menu is the Symbol Length, shown
below. In this menu, the user is prompted to enter a desired value in a range from 1 to 128,
and the menu shows a system default of 10. After a desired value has been entered, the
user must press Enter to confirm that the value is valid and return to the previous menu, or
press ESC to return to the previous menu without any change to the parameter. The user
could also return to the previous menu by pressing Enter when no value has been entered.
=======================[Symbol Length]===========================
A) Symbol Length = 10
Rang: 1 - 128
System Default: 10
-- PLEASE TYPE THE NEW VALUE, THEN ENTER, ESC TO CANCEL
-- NEW VALUE =
QX-870 Industrial Raster Scanner User's Manual
|
= DISABLE
= DISABLE
= 10
= DISABLE
= Standard
= DISABLE
,
= DISABLE
= DISABLE
Utilities
|
|
7-29