Microscan N2210WZ Owner's Manual page 331

Range Mode Status (Interleaved 2 of 5)
Serial Cmd: <K472,status,check character status,check character output,symbol length
#1,symbol length #2,guard bar
Default: 1 = Enabled
Options: 0 = Disabled
UPC/EAN
Serial Cmd: <K473,UPC
separator character,supplemental type,format UPC-E as UPC-A>
Default: 3 = Both Standard and Edge-to-Edge
Options: 0 = Disabled
1 = Standard
2 = Edge-to-Edge
3 = Both Standard and Edge-to-Edge
EAN Status
Serial Cmd: <K473,UPC
separator character,supplemental type,format UPC-E as UPC-A>
Default: 1 = Enabled
Options: 0 = Disabled
Supplementals Status (UPC/EAN)
Serial Cmd: <K473,UPC status,EAN
separator character,supplemental type,format UPC-E as UPC-A>
Default: 0 = Disabled
Options: 0 = Disabled
Separator Status (UPC/EAN)
Serial Cmd: <K473,UPC status,EAN status,supplementals
separator character,supplemental type,format UPC-E as UPC-A>
Default: 0 = Disabled
Options: 0 = Disabled
Separator Character (UPC/EAN)
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator
Default: , (comma)
Options: Any 7-bit ASCII character
QX-870 Industrial Raster Scanner User's Manual
status,range mode
1 = Enabled
status,EAN status,supplementals status,separator status,
status,EAN status,supplementals status,separator status,
1 = Enabled
status,supplementals
1 = Enabled
1 = Enabled
character,supplemental type,format UPC-E as UPC-A>
Appendices
status>
status,separator status,
2 = Required
status,separator status,
A-45