Chapter 7 Utilities; Serial Utility Commands - Microscan N2210WZ Owner's Manual

Default/Reset/Save
Scanner Status
Request Commands
Other Serial Utility
Commands
QX-870 Industrial Raster Scanner User's Manual
Recall Microscan Default Settings and Save for
<Zrdall>
Power-On (Will also default "sticky settings")
<A> Reset (Will not save for power-on)
<Arp> Reset and Recall Power-On Parameters
<Arc> Reset and Recall Customer Default Parameters
<Ard> Reset and Recall Microscan Default Parameters
<K?> All Status Request
<K??> All Descriptor Status Request
<K?#> All Range Status Request
<Knnn?> Single Status Request
<Knnn??> Single Descriptor Status Request
<Knnn?#> Single Range Status Request
<Knnnd> Default Customer Parameter
<@CAL> Calibrate without Menu
<@> Calibrate with Menu
<BCCFG> Enter Bar Code Configuration
Utilities
7-3