Microscan N2210WZ Owner's Manual page 317

Serial Trigger Character (Delimited)
Serial Cmd: <K201,serial trigger
Default: Space (0x20)
Options: Any 7-bit ASCII character
External Trigger State
Serial Cmd: <K202,active
Default: 1 = Positive
Options: 0 = Negative
End of Read Cycle
End of Read Cycle Mode
Serial Cmd: <K220,end of read
Default: 0 = Timeout
Options: 0 = Timeout
1 = New Trigger
2 = Timeout or New Trigger
3 = Last Frame
4 = Last Frame or New Trigger
Read Cycle Timeout
Serial Cmd: <K220,end of read
Default: 100 (x10 ms = 1 second)
Options: 1 to 65535
Decodes Before Output
Decodes Before Output
Serial Cmd: <K221,decodes before
Default: 1
Options: 1 to 255
Mode
Serial Cmd: <K221,decodes before output,mode>
Default: 0 = Non-Consecutive
Options: 0 = Non-Consecutive
Multisymbol
Number of Symbols
Serial Cmd: <K222,number of
Default: 1
Options: 1 to 100
QX-870 Industrial Raster Scanner User's Manual
character>
state>
1 = Positive
cycle,read cycle timeout>
cycle,read cycle
output,mode>
1 = Consecutive
symbols,multisymbol separator>
timeout>
Appendices
A-31