Microscan N2210WZ Owner's Manual page 180

I/O Parameters
Static Presentation
Static Presentation Mode is used in conjunction with
When operating in Static Presentation Mode, the red LEDs will illuminate while the
scanner is searching for a symbol in Continuous Read mode. When a symbol is placed
in the field of view and a good read occurs, the green LEDs will illuminate and stay on for
the duration of time set in
unless more than one symbol is enabled in
Note: If Static Presentation Mode is selected but the scanner is not in Continuous
Read, the Green Flash will not occur.
To use Static Presentation:
1. Enable Continuous Read.
2. Select the number of symbols.
3. Enable Static Presentation in
4. Select the read time in Green Flash Duration.
Match
The green LEDs will flash when a match condition is met. If multisymbol is enabled, then
green flash LEDs will illuminate only if all symbols qualify as a match. If matchcode is
disabled, then this mode will activate the LEDs on a good read.
Mismatch
Same as Match, except that LEDs will illuminate on a mismatch.
5-114
Green Flash Duration. Only one read will occur during that time
Number of
Green Flash
Continuous Read
Symbols.
Mode.
QX-870 Industrial Raster Scanner User's Manual
mode.