Figure 3-58 Motion Detection Actions Setup Screen - Honeywell HRSD40F User Manual

2.
3.
4.
5.
88
Figure 3-58
Highlight a field under the Record heading, and press
appears. You can associate as many cameras with that camera as you wish. If the
DVR detects motion on the selected camera, it starts recording video from all the
associated cameras.
Note You can associate as many cameras with that camera as you
wish. If the DVR detects motion on the selected camera, it starts
recording video from all the associated cameras.
Highlight a field under the Alarm-Out heading, and press
Alarm Output and Beep (the internal buzzer) that you would like to activate and
to sound whenever the DVR detects motion on the selected camera's input.
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Highlight a field under the Notify heading, and press
Notify menu appears.
Toggle the entire list On and Off by highlighting Notification and pressing
Toggle the individual items On and Off by highlighting that item and pressing
. Highlight OK and press
Motion Detection Actions Setup Screen
to accept your changes.
HRSD40F DVR User Guide
. A list of cameras
. Select between
. The Motion Detection
.