Configuring The Dvr To Run And Report Self-Diagnostics; Figure 3-67 Health Check Screen - Honeywell HRSD40F User Manual

5.
6.

Configuring the DVR to Run and Report Self-Diagnostics

The DVR can be configured to run self-diagnostics and report the results.
Configuring for a Health Check
1.
2.
3.
98
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Highlight the desired field under the PTZ heading, and press
presets appear. Select the preset positions for each PTZ camera, where you want
PTZ cameras to move to when the DVR detects text input.
Save your Text-In changes by highlighting Save and pressing
to exit the screen without saving the changes.
Highlight System Event in the Event menu and press
setup screen appears.
Figure 3-67
Highlight the field beside System and press
that you want the DVR to run self-diagnostics on the system. You can select from
1 hr. to 30 days or Never.
Highlight the Setup... field beside Check Recording and press
Recording screen appears.
Health Check Screen
HRSD40F DVR User Guide
. A list of PTZ
. Select Cancel
. The System Event
allows you to select the interval
. The Check