Table 4-6 Motion Search Options - Honeywell HRSD40F User Manual

Option
From
To
Type
Zone
Note
Sensitivity
Min. Blocks
1.
2.
3.
128
Function
Either enable First (highlight the box and press
means that the DVR begins the search at the first recorded image.
OR
Disable First and then enter a specific time and date from which
the DVR begins the search.
Either enable Last, which means that the DVR ends the search at
the last recorded image.
OR
Disable Last and then enter a specific time and date at which the
DVR ends the search.
Highlight the box beside Type and press
Motion Search and Museum Search. Motion Search detects
motion in the defined area. Museum Search detects if a defined
object has moved.
Highlight the box beside Zone and press
video appears with a grid overlaid. You can turn sensor blocks On
and Off to define the area of the picture in which you want to
search for motion.
The zone should be placed or focused on the centre or, at least,
within the outline of targeted object.
When setting the Museum Search Zone, the zone should be placed inside
the border line of the target object. If the selected block is placed on the
border line, then the sensitivity of the Museum Search may decrease.
Highlight the box beside Sensitivity and press
(low sensitivity) to 5 (high sensitivity).
Highlight the box beside Min. Blocks and press
number of sensor blocks that must be activated. Setting the Min
Blocks will only be available if Motion Search is selected.
Set your search conditions based on the options shown in
Select Search and press
screen.
Select Cancel to exit the screen without saving the changes.
Note If you choose to search for motion events for another camera,
you will be asked whether or not you want to delete the previous
search results from the list.
Table 4-6 Motion Search Options
. The search results appear in the Motion Search
HRSD40F DVR User Guide
), which
. Select between
. An image from the
. Select from 1
. Set the
Table 4-6.