Figure 3-46 Default Screen; Table 3-10 Default Settings - Honeywell HRSD40F User Manual

4.
5.
6.
7.
8.
78
Highlight the field under the Mode heading and press
recording mode that will be used. Choose from: No Record, Time, Event, and
Time & Event.
When the DVR is in the No Record mode, it will not record during the preset day
and time range as long as the PANIC button is not pressed. Use the No Record
mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the
the screen. The DVR records and the
screen during the scheduled times.
When the DVR is in the Event mode, the red
corner of the screen. The DVR records and displays the
corner of the screen when any event occurs. When the DVR is in the Pre-Event
recording mode, the yellow
is not recording. When the DVR is in the Pre-Event mode, the red
display when any event occurs and the DVR starts recording.
When the DVR is in the Time & Event mode, the DVR follows the Time settings
and the icon displays. The DVR follows the Event settings and the
displays.
Highlight the field under the Channels heading and press
cameras records.
Highlight the field under the Settings heading and press
recording settings. You can set the ips and Quality of the recording for any modes
you set up in the Mode column. If you do not set the ips and Quality in the
Settings column, the DVR uses the default settings.
Highlight the box under the
settings. You will be asked to confirm that you want to delete the settings.
Highlight Default... and press
Figure 3-46
Highlight the fields and press
Table 3-10 Default Settings
Setting Function
ips Highlight a field under ips and press
per second for Time and Event recording. You can select from 0.10
to 30.0 images per second.
Quality Highlight a field under Quality and press
recorded image quality for Time and Event recording. You can
select from: Very High, High, Standard and Low.
icon displays at the top-left corner of the
icon displays when there is no event, and the DVR
heading and press
. The Default screen appears.
Default Screen
to make changes.
HRSD40F DVR User Guide
to change the
icon displays at the top-left corner of
icon displays at the top-left
icon at the top-left
to select which
to define the
to delete the recording
to set the default images
to set the default
and
icon