Table of Contents
Advertisement
WARNING!
Caution
Your DVR is now ready to operate. Please continue to
Chapter 4,
32
Figure 2-11
Power Cord Connector
ROUTE POWER CORDS SO THAT THEY ARE NOT A
TRIPPING HAZARD. ENSURE THAT THE POWER CORD
WILL NOT BE PINCHED OR ABRADED BY FURNITURE.
DO NOT INSTALL POWER CORDS UNDER RUGS OR
CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR
POWER OUTLET DOES NOT HAVE A GROUNDING PIN
RECEPTACLE, DO NOT MODIFY THE PLUG.
DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO
MANY DEVICES IN TO ONE CIRCUIT.
In noisy electrical environments, use an Uninterruptible Power
Supply (UPS) to minimize the potential of damage to the DVR
from undesired power related hazards. Connect the UPS between
the DVR and the AC voltage supply.
Operation.
HRSD40F DVR User Guide
Chapter 3, Configuration
and
Advertisement
Table of Contents
