Table of Contents
Advertisement
Configuration
Selecting a Camera or Cameras for Recording
1.
2.
Setting Alarm-Out Actions
1.
2.
Document 800-00918 Rev F
02/08
Figure 3-60
Motion Detection Actions 1 Screen
Note
You can associate multiple cameras with a camera that detects
motion.
Highlight the desired field under the Record heading, and press
cameras appears.
Select the cameras that you want the DVR to record when the DVR detects motion
on the selected camera.
If the DVR detects motion on the selected camera, it starts recording video from all
the associated cameras.
Note
For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Highlight the desired field under the Alarm-Out heading, and press
Alarm Outputs and the toggle for the Beep appears.
Select the Alarm Output connectors that you would like to activate whenever the
DVR detects motion on the selected camera.
You can also set the DVR internal buzzer to sound if motion is detected on the
selected camera.
. A list of
. A list of
85
Advertisement
Table of Contents
