Table of Contents
Advertisement
Highlight the field beside Type and press
ADSL (PPPoE).
Setting LAN Parameters Manually
1.
2.
3.
4.
58
Figure 3-23
Select Manual from the Type field to set up LAN parameters manually.
Note
You need to get the appropriate IP Address, Gateway, and
Subnet Mask from your network administrator.
Change the numbers by highlighting them and using the Up and Down arrows to
increase or decrease the number.
The factory default LAN settings are:
IP Address:192.168.1.129
Gateway:
Subnet Mask:255.255.255.0
Highlight the field beside DNS Server and press
the DNS server. If you set up the DNS Server, you can use the domain name of
the DVRNS server instead of the IP address during the DVRNS Server setup. See
Registering the Network for DVRNS Service
Highlight Port Number Setup... and press
appears.
LAN (Manual) Setup Screen
192.168.1.254
HRSD40F DVR User Guide
to select from Manual, DHCP, and
to enter the IP address of
on page
61
for details.
. The Port Number Setup screen
Advertisement
Table of Contents
