Go To Search; Figure 4-11 Go To Search Menu; Figure 4-12 Go To The Date/Time Window - Honeywell HRSD40F User Manual

Using the De-Interlace Filter to Eliminate Horizontal Scan Lines and
Flashes
The video signal has a time difference of 1/60 second (1/50 second for PAL) between
odd and even fields because it is composed of 60 interlaced fields per second (50 fields
for PAL). When recording video with Very High (D1) resolution, video is made up of
frame units combining two fields - one odd field and one even field. This can cause
horizontal scan lines or flashes in areas with motion because of the time difference
between the two fields. Turning on the de-interlace filter provides clearer video by
eliminating these horizontal scan lines and flashes.

Go To Search

There are three Go To search types: First, Last, and Date/Time.
Searching for the First or Last Images using Go To Search
1.
2.
Searching for Video from a Specific Date/Time
1.
2.
3.
4.
118
Select Go To from the Search menu. The Go To search menu appears.
Figure 4-11
Select First to see the first recorded image; Select Last to see the last recorded
image.
Select Go To from the Search menu. The Go To search menu appears. See
Figure 4-11 above.
Select Date/Time. The Go to the Date/Time window appears.
Figure 4-12
Move the cursor over the Date/Time field and press
front panel arrow buttons to highlight the year, month, day, hours, minutes and
seconds. Use the Up and Down arrow buttons to change to the date and time you
want to search for video. Press
Select Go and press
time and date.
Go To Search Menu
Go to the Date/Time Window
when you have set the date.
to see the video that was recorded on your selected
HRSD40F DVR User Guide
. Use the Left and Right