Honeywell HRSD40F User Manual page 138

138
Note The display settings of your PC affect the image display.
If you are experiencing display problems, click the right mouse
button on the background screen and select
Properties>Settings then set the Color quality to 32 bit. Then
select Advanced>Troubleshoot and set Hardware Acceleration
to Full.
Ensure sure that DirectX version 9.0 or higher has been installed
if the display problem continues to occur. To check the version
of DirectX, click Start>RUN and type dxdiag and press Enter.
The DirectX Diagnostic Tool dialog box displays.
Then move to the Display tab and ensure DirectDraw
Acceleration is set to Enabled. Test the DirectDraw by selecting
the DirectDraw Test button. After changing the settings, update
the driver version of the VGA card.
If you still have display problems after changing all display
settings as described above, try replacing the video card. Video
cards with an ATI chipset are recommended..
Option ClipPlayer Function
Exit the Player program.
Go to the beginning of the video clip.
Play the video clip in fast reverse.
Go back one frame of the video clip.
Play the video clip.
Go forward one frame of the video clip.
Play the video clip in fast forward.
Go to the end of the video clip.
Show the previous page.
Cycle through the screen layouts: 2x2, +7, 3x3, and 4x4.
Show the next camera group if there is recorded video in the
next camera group in the current screen mode.
HRSD40F DVR User Guide