Table of Contents
Advertisement
Installation
Caution
Connecting the Audio In/Out
Your DVR can record audio from up to four sources. Connect the audio sources to
Audio In 1, Audio In 2, Audio In 3, and Audio In 4 as needed using RCA jacks. Connect
Audio Out to your amplifier.
Connecting the Power Cord
Connect the power cord to the DVR and then to a wall outlet.
Document 800-03097 Rev C
03/09
This Network Port is not designed to be connected with cables or
wires that are intended for outdoor use.
Figure 2-10
Audio In/Out Connectors
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
AUDIO IN 4
Note
It is the user's responsibility to determine if local laws and
regulations permit recording audio.
Note
The DVR does not have amplified audio output, so you will need
a speaker with an amplifier. The DVR does not have a
pre-amplifier for audio input, so the audio input should be from
an amplified source; not directly from a microphone.
AUDIO OUT
31
Advertisement
Table of Contents
