Figure 3-65 Motion Detection Actions 1 Screen - Honeywell HRXDS16D1T User Manual

1.
2.
3.
4.
90
Figure 3-65
Note You can associate multiple cameras with a camera that detects
motion.
Highlight the box under the Record column, then press #. A list of cameras
appears. You can associate as many cameras with that camera as you wish. If the
DVR detects motion on the selected camera, it starts recording video from all the
associated cameras.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Highlight the box under the Alarm-Out column, then press #. A list of Alarm
Outputs appears. You can associate as many Alarm-Outs with that camera as you
wish. When the DVR detects motion on the selected camera's input, it triggers
output signals on all the associated Alarm-Out connectors. You can also have the
DVR's internal buzzer sound if motion is detected on the selected camera.
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Highlight the box under the Notify column, then press #. You can toggle the entire
list On and Off by highlighting Notification, then press #.
You can toggle the individual items On and Off by highlighting that item, then
press #.
Highlight OK, then press # to accept your changes.
Motion Detection Actions 1 Screen
HRXDS Series DVR User Guide