Table 3-12 Text-In Setup Screen Options - Honeywell HRSD40F User Manual

Configuration
Table 3-12
Option
Virtual Port
Transaction
Start
Any Character
Note
Transaction End
X more line(s)
Line Delimiter
Document 800-03097 Rev C
03/09
Text-In Setup Screen Options
Function
Highlight the field beside Virtual Port, press
the port number to use. You can choose from 1 to 4. This field
is activated only when setting up the VP Filter device.
Highlight the field beside Transaction Start, and press
Use the virtual keyboard to enter the Transaction Start string.
Refer to the device manufacturer's documentation for the text
string that the device first sends when a transaction starts.
If you want the DVR to react to any character sent from the
text-in device, turn on Any Character.
Highlight Any Character, and press
On and Off.
Note
If Any Character is turned On, you can not enter any text in the Start String
field.
Highlight the field beside Transaction End, and press
Use the virtual keyboard that appears to enter the Transaction
End string.
Refer to the device manufacturer's documentation for the text
string that the device sends when a transaction ends.
Highlight the X more line(s) field and press
number of additional lines of text that you want the DVR to
record. You can choose from 0 to 10.
Highlight the field beside Line Delimiter, and press
the virtual keyboard to enter the character(s) that the device
uses to indicate the end of a line.
Control characters can be created using ^ and a capital
letter. For example, you can use ^J for NL (New Line), and ^M
for CR (Carriage Return).
Refer to the device manufacturer's documentation for Line
Delimiter character(s).
If you choose this option, then you can not enter a
Transaction Start text string.
, then enter
.
to toggle between
.
. Select the
. Use
95