Auto Logout - Honeywell HRSD40F User Manual

Adding or Changing a User's Password
Highlight the User Name in the Group & User column, then press
buttons on the DVR front panel or infrared remote control or use the virtual keyboard to
enter the password.
Caution
Deleting a User or Group
1.
2.
Auto Login
Highlight the box beside Auto Login to select a User to be automatically logged in
when the DVR is powered up. It can also be set to never automatically login a user.

Auto Logout

Highlight the box beside Auto Logout to select from a list of times that the user will be
automatically logged out. The options are: Never, 1 min., 3 min., 5 min., 10 min., 15
min., 20 min., 25 min., 30 min. and 1 hr.
Saving Your Changes
Save the changes you make in the User screen by highlighting Save and pressing
Select Cancel to exit the screen without saving the changes.
54
Write down the new password and keep it in a secure place. If you
forget or lose the password, you will have to reset the DVR using
the Factory Reset Button
39). You will lose all your data settings.
Highlight next to the Group or User you want to delete, then press
is grayed out, then that Group or User cannot be deleted.
Confirm that you want to delete that Group or User.
Note To delete the User that is currently logged onto the DVR on a
local system or a PC running RAS, log the user out of the system
first, then delete the user.
HRSD40F DVR User Guide
(Resetting to Default Settings
.Use the camera
on page
. If the
.