Disassembly; Removing The Process Unit - Kyocera Mita Ecosys FS-1010 Service Manual

5-2 Disassembly

Before proceeding, remove the paper cassette and the optional paper feeder, if installed.

5-2-1 Removing the process unit

1. Open the top cover 1.
2. Open the front cover 2.
3. Lift the process unit 3 together with the toner container out of the printer.
CAUTIONS After removing the process unit, seal it in the protective bag and place it on flat
surface. Do not place the process unit in a dusty area.
Do not give impact to the process unit.
Do not place floppy disks near the process unit.
FS-1010
Figure 5-2-1 Removing the process unit
5-4
1
2
3