Provisioning; Overview; Auto Provisioning - Grandstream Networks UCM6100 Series User Manual

OVERVIEW

Grandstream SIP Devices can be configured via Web interface as well as via configuration file through
TFTP/HTTP/HTTPS download. All Grandstream SIP devices support a proprietary binary format
configuration file and XML format configuration file. The UCM6100 provides a Plug and Play mechanism to
auto-provision the Grandstream SIP devices in a zero configuration manner by generating XML config file
and having the phone to download it within LAN area. This allows users to finish the installation with ease
and start using the SIP devices in a managed way.
To provision a phone, three steps are involved, i.e., discovery, assignment and provisioning. The UCM6100
creates XML config file to the detected/assigned Grandstream device and accomplishes the following
configurations on the device after the provisioning:

A UCM6100 extension will be assigned and registered on the phone.

SIP-related network settings such as "NAT traversal" and "Use Random Port" are configured on the
phone.

Call feature settings such as "Public Mode", "Voicemail User ID", "Dial Plan" and "Auto Answer".

LDAP client configurations will be set up automatically on the phone to use the default LDAP directory
generated in the UCM6100 LDAP server.
This section explains how zero config works on the UCM6100. The settings for this feature can be accessed
via Web GUI->PBX->Basic/Call Routes->Zero Config.

AUTO PROVISIONING

By default, the Zero Config feature is enabled on the UCM6100 for auto provisioning. Three methods of
auto provisioning are used.
Firmware Version 1.0.5.19

PROVISIONING

UCM6100 Series IP PBX User Manual Page 51 of 183