Figure 23: Discovered Devices
ASSIGNMENT
In the discovered list, click on
to open the edit dialog to assign an extension or multiple extensions to
this device. Hot-Desking can also be enabled from this edit page.
Figure 24: Assign Extension To Device
After saving the edit dialog, the XML config file will be generated in the UCM6100. Reboot the phone or
trigger the phone to download the config file by clicking on
icon for the entry in the zero config device
list.
CREATE NEW DEVICE
Users could also directly create a new device and assign the extension before the device is discovered by
the UCM6100. Once the device is plugged in, it can then be discovered and provisioned by the UCM6100.
Firmware Version 1.0.5.19
UCM6100 Series IP PBX User Manual
Page 55 of 183