Web Gui Configurations; Web Gui Languages - Grandstream Networks UCM6100 Series User Manual

4. Enter the administrator's login and password to access the Web Configuration Menu. The default
administrator's username and password is "admin" and "admin". It is highly recommended to change
the default password after login for the first time.
Note:
By default, the UCM6100 has "Redirect From Port 80" enabled. Therefore, if users type in the UCM6100
IP address in the web browser, the web page will be automatically redirected to the page using HTTPS
and port 8089. For example, if the LCD shows 192.168.40.167, please enter 192.168.40.167 in your web
browser and the web page will be redirected to:
https://192.168.40.167:8089
The option "Redirect From Port 80" can be configured under the UCM6100 web GUI->Settings->HTTP
Server.

WEB GUI CONFIGURATIONS

There are four main sections in the Web GUI for users to view the PBX status, configure and manage the
PBX.

Status: Displays PBX status, System Status, System Events and CDR.

PBX: To configure extensions, trunks, call routes, zero config for auto provisioning, call features,
internal options, IAX settings and SIP settings.

Settings: To configure network settings, firewall settings, change password, LDAP Server, HTTP
Server, Email Settings, Time Settings and NTP server.

Maintenance: To perform firmware upgrade, backup configurations, cleaner setup, reset/reboot,
syslog setup and troubleshooting.

WEB GUI LANGUAGES

Currently the UCM6100 series web GUI supports the following languages:
Firmware Version 1.0.5.19 UCM6100 Series IP PBX User Manual Page 29 of 183