Click on "Create New Device" and the following dialog will show. Enabled Hot-Desking(Optional), fill in the
MAC address (required), IP address (optional), Version (optional), Model (optional) and the extension to
assign to the device. Click on "Save" to add the device to the provision list.
Figure 25: Create New Device
PROVISIONING
After the successful discovery and assignment configuration on the UCM6100, the device will start
downloading the config file and take the new configuration with the extension registered.
Firmware Version 1.0.5.19
UCM6100 Series IP PBX User Manual
Page 56 of 183