Upgrading Via Local Upload; Figure 89: Local Upgrade - Grandstream Networks UCM6100 Series User Manual

Firmware Server Path
Firmware File Prefix
Firmware File Suffix
HTTP/HTTPS User Name
HTTP/HTTPS Password
Please follow the steps below to upgrade the firmware remotely.

Enter the firmware server path under Web GUI->Maintenance->Upgrade.

Click on "Save". Then reboot the device to start the upgrading process.

Please be patient during the upgrading process. Once done, a reboot message will be displayed in the
LCD.

Manually reboot the UCM6100 when it's appropriate to avoid immediate service interruption. After it
boots up, log in the web GUI to check the firmware version.

UPGRADING VIA LOCAL UPLOAD

If there is no HTTP/TFTP server, users could also upload the firmware to the UCM6100 directly via Web
GUI. Please follow the steps below to upload firmware locally.

Download the latest UCM6100 firmware file from the following link and save it in your PC.
http://www.grandstream.com/support/firmware

Log in the Web GUI as administrator in the PC.

Go to Web GUI->Maintenance->Upgrade, upload the firmware file by clicking on
the firmware file from your PC. The default firmware file name is ucm6100fw.bin

Click on to start upgrading.
Firmware Version 1.0.5.19
Define the server path for the firmware server.
If configured, only the firmware with the matching encrypted prefix will
be downloaded and flashed into the UCM6100.
If configured, only the firmware with the matching encrypted postfix will
be downloaded and flashed into the UCM6100.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.

Figure 89: Local Upgrade

UCM6100 Series IP PBX User Manual
and select
Page 172 of 183