Hardware Health Monitor; Cpu Overheat Alarm - Silicon Graphics InfiniteStorage Server 3500 User Manual

Hardware Health Monitor

CPU Overheat Alarm

!
007-5653-001
Terminal Type
This feature allows the user to select the target terminal type for Console Redirection. The options
are ANSI, VT100, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard definition that provides a way to send commands from a remote console.
Available options are Enabled and Disabled.
Sredir Memory Display Delay
This feature defines the length of time in seconds to display memory information. The options are
No Delay, Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
This feature allows the user to monitor system health and review the status of each item as
displayed.
This option allows the user to select the CPU Overheat Alarm setting which determines when the
CPU OH alarm will be activated to provide warning of possible CPU overheat.
Warning:
Any temperature that exceeds the CPU threshold temperature predefined by
the CPU manufacturer may result in CPU overheat or system instability. When the CPU
temperature reaches this predefined threshold, the CPU and system cooling fans will run at
full speed. To avoid possible system overheating, please be sure to provide adequate airflow
to your system.
The options are:
• The Early Alarm: Select this setting if you want the CPU overheat alarm (including the LED
and the buzzer) to be triggered as soon as the CPU temperature reaches the CPU overheat
threshold as predefined by the CPU manufacturer.
• The Default Alarm: Select this setting if you want the CPU overheat alarm including the
LED and the buzzer) to be triggered when the CPU temperature reaches about 5
Advanced Setup Configurations
C above the
º
65