Additional Hardware Components - Silicon Graphics UV 30 User Manual

1: Introduction

Additional Hardware Components

6
In addition to the serverboard and chassis, the following hardware components have been included
with the server:
• Four conventional riser cards
• One Ultra riser card
• A plastic air shroud
• Four 8-cm system cooling fans
• Four passive CPU heat sinks
• One SAS backplane
• 24 hot-swap 2.5" HDD trays
• One rack rail set
Important: SGI servers may sometimes require driver versions that are not included in the
original operating system release. When required, SGI provides these drivers on the system disk
(pre-installed in the factory) or via portable media or download. For more information on this
topic, check with your sales or service representative.
007-6419-002