6: BIOS
Boot Features
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'Del' Message Display
52
This section describes the Boot Features options.
If Enabled, this option will skip certain tests during POST to reduce the time needed for system
boot. The options are Enabled and Disabled.
Note: The default option is highlighted in bold face throughout this chapter.
This option allows the bootup screen options to be modified between POST messages or the OEM
logo. Select Disabled to display the POST messages. Select Enabled to display the OEM logo
instead of the normal POST messages. The options are Enabled and Disabled.
This sets the display mode for Option ROM. The options are Force BIOS and Keep Current.
This feature selects the Power-on state for Numlock key. The options are Off and On.
This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are
Disabled and Enabled.
This feature displays "Press DEL to run Setup" during POST. The options are Enabled and
Disabled.
007-5653-001