Remote Access Configuration; Remote Access - Silicon Graphics InfiniteStorage Server 3500 User Manual

Table of Contents

6: BIOS

Remote Access Configuration

This allows the user to enable the Remote Access feature. The options are Disabled and Enabled.

If Remote Access is set to Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console Redirection. The

options are COM 1 and COM 2, and COM 3.

Base Address, IRQ

This item displays the base address and IRQ of the serial port used for Console Redirection.

Serial Port Mode

This feature allows the user to set the serial port mode for Console Redirection. The options are

115200 8, n 1; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1.

Flow Control

This feature allows the user to set the flow control for Console Redirection. The options are None,

Hardware, and Software.

Redirection After BIOS POST

Select Disabled to turn off Console Redirection after Power-On Self-Test (POST). Select Always

to keep Console Redirection active all the time after POST.

Note: This setting may not be supported by some operating systems.

Select Boot Loader to keep Console Redirection active during POST and Boot Loader. The

options are Disabled, Boot Loader, and Always.

007-5653-001

Table of Contents

Do you have a question about the InfiniteStorage Server 3500 and is the answer not in the manual?

Iss3500