Replacing The Power Supply - Silicon Graphics InfiniteStorage Server 3500 User Manual

Replacing the Power Supply

007-5653-001
The power supply for the ISS3500 system is redundant and hot-swappable. If you have this option
(an additional power supply), you can replace the power supply with the system powered up,
otherwise, the system must be powered off to replace the power supply.
To replace the power supply, perform the following steps:
1. The ISS3500 system includes a redundant power supply (at least two power modules). The
server may continue running if only one power supply module is removed at a time.
2. Unplug the power supply that will be replaced.
3. Push the release tab on the back of the power supply.
4. Pull the power supply out using the handle.
5. Replace the failed power module with another of the same model.
6. Push the new power supply module into the power bay until it clicks into the locked position.
7. Plug the AC power cord back into the module and power up the server.
Power Supply
39