Additional Hardware Components - Silicon Graphics Rackable C2112-4GP3 User Manual

Additional Hardware Components

007-6363-001
In addition to the serverboards and chassis, the following hardware components have been
included with the server:
• Heat sinks
• Four 1U passive CPU heat sinks for rear CPU
• Four 1U passive CPU heat sinks with narrow ILM
• Four plastic air shrouds
• Four 80x80x38mm cooling fans
• Four SATA backplanes
• Twelve hot-swap 3.5" HDD trays
• Eight 21-centimeter SATA cables
• Four riser cards
• One rail set
• One CD with device drivers
Important: SGI Rackable server systems may sometimes require driver versions that are not
included in the original operating system release. When required, SGI provides these drivers on
an SGI Driver CD, which may ship with the system, or on the system disk (pre-installed in the
factory). For more information on this topic check with your sales or service representative.
Additional Hardware Components
7