Chapter 4
4.
Chassis Setup and Maintenance
This chapter covers the steps required to install components and perform maintenance on the
ISS35500 chassis. For component installation, follow the steps in the order given to eliminate the
most common problems encountered. If some steps are unnecessary, skip ahead to the step that
follows.
Tools Required: The only tool you will need to install components and perform maintenance is a
Phillips screwdriver.
Warning:
Review the warnings and precautions listed in the manual before setting up or
!
servicing this chassis. These include information in Chapter 2: System Safety and the
warning/precautions listed in the setup instructions
.
007-5653-001
25