Hardware Health Monitor - Silicon Graphics Octane III User Manual

4: Octane III Workstation BIOS Information

Hardware Health Monitor

42
• Flow Control
This feature allows the user to set the flow control for Console Redirection. The options are
None, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power-On Self-Test (POST). Select Always
to keep Console Redirection active all the time after POST.
Note: This setting may not be supported by some operating systems.
Select Boot Loader to keep Console Redirection active during POST and Boot Loader. The
options are Disabled, Boot Loader, and Always.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirection. The options
are ANSI, VT100, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard definition that provides a way to send commands from a remote console.
Available options are Enabled and Disabled.
Sredir Memory Display Delay
This feature de.nes the length of time in seconds to display memory information. The options are
No Delay, Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
This feature allows the user to monitor system health and review the status of each item as
displayed.
CPU Overheat Alarm
This option allows the user to select the CPU Overheat Alarm setting which determines when the
CPU OH alarm will be activated to provide warning of possible CPU overheat.
007-5633-001