Pci/Pnp Configuration; Clear Nvram; Plug & Play Os; Pci Latency Timer - Silicon Graphics InfiniteStorage Server 3500 User Manual

6: BIOS

PCI/PnP Configuration

Clear NVRAM

Plug & Play OS

PCI Latency Timer

PCI IDE BusMaster

Slot 1 Option ROM – Slot 7 Option ROM

LAN1 PXE/LAN2 PXE

62
This feature clears the NVRAM during system boot. The options are No and Yes.
Selecting Yes allows the OS to configure Plug & Play devices. (This is not required for system
boot if your system has an OS that supports Plug & Play.) Select No to allow the AMI BIOS to
configure all devices in the system.
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select 64 to set the
PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128, 160, 192, 224 and 248.
When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives. The options
are Disabled and Enabled.
Select Enabled to enable the Slot 3 – Slot 7 Option ROMs, which allow you to boot from a PCI
device installed on a PCI slot. The system defaults:
Slot 1 Option ROM
Slot 3 Option ROM
Slot 4 / LSI SAS3 Option ROM
Slot 5 Option ROM
Slot 6 Option ROM
Slot 7 Option ROM
Select Enabled to enable the LAN1/LAN2 PXE Option ROMs, which allow you to boot using a
network interface. The options are Enabled and Disabled.
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
007-5653-001