User Manual - Vga; Operation - Hatteland JH 10T06 MMD User Manual

Operation

Power Light Indicator
Power Switch
POWER
Brightness Knob
Auto LED
POWER SWITCH:
This TFT display features a Instant-ON/Delay-OFF switch, which ensures that the display
is not turned off by user accident.
Power ON: To turn the display on, press down the power switch. The power light indicator will turn green.
Note: If no VGA signal sync is present, it will turn red. No error message will be displayed.
Power OFF: To turn the display off, press and hold the power switch down for 3 seconds.
DISPLAY ADJUSTMENT CONTROLS:
This TFT display features a 100% dimmable image, which means it is capable of displaying a
completely black image when the brightness knob is turned fully to the left.
BRIGHTNESS - Adjust the image brightness with the knob marked with an sun icon.
AUTOMATIC POWER LIGHT DIMMING:
This TFT display features a intelligent Auto LED (Mode Status LED) which control the light intensity of
the power light indicator based on your enviroment lightning. To test it, simply put your thumb over it. The
power light indicator will fade down or up.

User Manual - VGA

83 IND100064-3 Rev.1