Hatteland JH 10T06 MMD User Manual page 99

Osd Menu Functions
(Sub-menu)
OSD Menu>
In this sub-menu the user can modify the horizontal position, vertical position, horizontal size,
transparency, time out and auto save parameters for the OSD Menu itself.
Pressing the "Adjust Button (+)" will activate a new sub-menu which contains these functions:
•
Menu Hori Position
Pressing the "Adjust Buttons (-) or (+)" will move the OSD Menu horizontally (left or right).
The slider on screen will also move from left or right indicating the current setting and as a numerical
value. Range 0 to 62
•
Menu Vert Position
Pressing the "Adjust Buttons (-) or (+)" will move the OSD Menu vertically (up or down).
The slider on screen will also move from left or right indicating the current setting and as a numerical
value. Range 0 to 60
•
Transparency
Pressing the "Adjust Buttons (-) or (+)" will adjust the OSD Menu transparent level in a stepwise
manner. The slider on screen will also move from left or right indicating the current setting and as a
numerical value. Range 0 to 3
•
Time Out
Pressing the "Adjust Buttons (-) or (+)" will modify the timeout of the OSD Menu. The parameter
selected will be highlighted. Values are in seconds before the OSD Menu will automatically disappear
from the display area. Available parameters are:
Choosing
cont
•
Auto Save
Pressing the "Adjust Buttons (-) or (+)" will choose whenever the modified settings will be
automatically saved when the OSD Menu exits. The parameter selected will be highlighted.
-When set to
Off
function and choosing save.
-When set to all settings modified will automatically be saved when the user exist the menu, or
On
the menu exits itself based on a timeout value.
•
Back>
Pressing the "Adjust Button (+)" or "MENU" will exit this sub-menu with the modified settings
intact.
User Manual - STD
(never auto exit) requires that the user manually exits the menu.
the user will manually have to save the modfied settings using the
31
30
10/20/30/45/60/cont
99 IND100064-2 Rev.1
Exit Menu