Table of Contents
Advertisement
Installation Recommendations
5. Monitors in the bridge wing area must be installed or mounted by suitable alignment or
bulkhead/ deckhead mounting in such a way that reflections of light from the front pane of the
monitor are not directed into the observer's viewing direction.
6. The use of ordinary commercial filter plates or filter films is not permitted for items of equipment
that require approval (by optical effects, "aids" of that kind can suppress small radar targets, for
example).
Cables
Use only high quality shielded VGA cable with separate coax for Red, Green and Blue video signal.
Or if your product have an DVI-D connector, use only high quality DVI cables.
Jakob Hatteland Display AS supply a varity of high quality VGA or DVI cables intended for this use.
Cable Entries & Connectors (Marked area) - Illustration only
Maximum Cable Length
The VGA/DVI cable should generally be kept as short as possible to provide a high quality output
on the display. The maximum cable length will depend on the signal resolution and frequency but
also on the quality of the signal output from the computer. We recommend using 60Hz vertical
frequency for our display monitors.
Cables up to 10 meters generally provides good picture quality even with a 1600x1200 (UXGA)
60Hz signal. In most cases (especially with lower resolutions) even longer cables will provide a
satisfactory result. This should however be tested in advance before making the decision on how
far the monitor can be placed from the signal source.
Installation
Bottom View
Back View
19
IND100078-1 Rev.3
Hide quick links:
Advertisement
Table of Contents
