Specifications - Jh 17T01 Mmd - Hatteland JH 10T06 MMD User Manual

Specifications - JH 17T01 MMD

TFT Display:
17.4" viewable image size
Thin Film Transistor (TFT)
MVA technology
Characteristics:
Pixel number : 1280 x 1024
Pixel pitch (RGB) : (0,27) (H) x 0,27 (V) mm
Response Time : 25 ms (typ)
Contrast Ratio : 400:1 (typ)
Light Intensity : 220 cd/m2 (typical)
Viewable Angle :+/- 80 deg.
Display Colors Analog Input:
16.777.216 colors (8-bit color)
RGB Input Signal:
Analog RGB 0,7Vp-p
Input impedance 75 Ohm
Sync Signal:
Digital separate sync., Composite sync., sync. on green
Auto detects VGA -> SXGA, interlaced and non interlaced
Synchronisation Range:
Horizontal : 31,5 kHz to 91,1 kHz
Vertical : 60 Hz * to 85 Hz
Resolutions:
640 x 350 / 640 x 480 / 720 x 400
800 x 600 / 1024 x 768 / 1280 x 1024 *
Video Input Signal:
Interlaced NTSC, PAL/SECAM video with input
format of composite video, S-Video & component video
(YCrCb)
* Recommended for optimum picture quality
For additional information, datasheets and
support for this product, please visit our website:
www.hatteland.com
(typical)(Up/Down/Left/Right)
(@ CR > 10)
Active Display Area:
345,6 (H) x 276,48 (V) mm
Power Supply:
JH 17T01 MMD A1
JH 17T01 MMD A2
Power Consumption:
Operating: Max 60 W
Environmental Considerations:
Operating: Temperature -15 deg. C to +55 deg. C
Humidity 30% to 90% (n on conde nsing)
Storage: Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)
Dimensions:
460 (W) x 400 (H) x 60.10 (D) mm
Weight: 9.2 kg (approx w/bracket)
Input Signal Terminal:
RGB (PC) signal:
15pin mini D-SUB (Female)
Video Signal:
Composite video
S-Video
Power:
JH 17T01 MMD A1
JH 17T01 MMD A2
Touch Screen: (optional)
1 x D-SUB 9P Connector (female)
User Controls:
Power On/Off button, Brightness Control, Mode Status LED
On Screen Display Control, Auto LED intensity adjust.
Specification and design are subject to change without notice.
37 IND100129-2 Rev 1
: 115VAC/60Hz or 230VAC/50Hz
: 24 VDC
: Phono plug
: S-Video plug
: Std IEC inlet (AC input)
: Screw terminal (DC input)