Hatteland JH 10T06 MMD User Manual page 101

Osd Menu Functions
Extended Menu>
On this sub-menu the user can modify various OSD Menu parameters such as Direct Access (hot-keys)
and language for all the OSD Menu and its submenus including any messages.
Pressing the "Adjust Button (+)" will activate a new sub-menu which contains these functions:
• DOS Text or Graphics
Pressing the "Adjust Buttons (-) or (+)" will select between
The parameter selected will be highlighted. Leave this setting to
Direct Access 1>
•
Allow the user to define the hot-keys (-) or (+) / Up or Down ) to one of the OSD functions.
When the user presses one of the "Adjust Buttons (-) or (+)" or "Select Buttons / Up or Down" the
assigned hot-key will increase / decrease the value without the user entering the OSD Menu itself.
This can be very time consuming if the user has to modify any of the OSD functions quickly.
Pressing the "Adjust Button (+)" will activate a new sub-menu which contains these functions:
Brightness
•
Selecting this function will assign "Brightness" parameter changes to the
"Adjust Buttons (-) or (+)" buttons.
•
Contrast
Selecting this function will assign "Contrast" parameter changes to the
"Adjust Buttons (-) or (+)" buttons.
•
Back>
Pressing the "Adjust Button (+)" or "MENU" will exit the sub-menu one level with the
modified settings intact and saved.
Direct Access 2>
•
The same procedure applies here as above on:
The user can now assign the "Select Buttons / Up or Down" to the selected OSD function.
•
Language
Allow the user to configure the OSD Menu language for all the OSD Menu and its submenus
including any messages. Pressing the "Adjust Button (+)" will activate a new sub-menu
which enable the user to select the preferred language. The parameter selected will be highlighted.
Available languages are: English, Italian, Francais, Espanol, Svenska, Nederlands, Deutsche.
• Back>
Pressing the "Adjust Button (+)" or "MENU" will exit the language sub-menu with the
modified settings intact and saved. Pressing it once more will also exit out to the main menu.
Exit Menu
Pressing the "Adjust Button (+)" will save the settings and exit the menu.
Pressing the "Adjust Button (-)" will exit the menu but does not save the modifed settings.
User Manual - STD
(Sub-menu)
or
Text
Graphics
Direct Access 1>
101 IND100064-2 Rev.1
Graphics
for best results.