Setra Systems Super Count Operator's Manual page 34

DISPLAYING CAPACITY, SOFTWARE VERSION AND SETUP INFORMATION
Setra is continually making improvements to its products. As a result the operating software, or firm-
ware, of the scale has a revision number. The revision number may prove useful in communicating
with your dealer or Setra in case of difficulty.
Information regarding the scale's particular setup can be obtained at any given time; however, it is
necessary to connect the scale to a printer or computer, as this information is transmitted via the serial
port. The format of the printed information is as follows:
Setra SUPER COUNT
Capacity:
Software Version:
Time/Date:
Alt Print:
Label Header: YOUR COMPANY NAME, ETC. (if defined in ID 7)
Baud Rate: nnnn
Minimum Sample Size: nnn pieces
Minimum Accuracy: nn.nn%
"x" units per gram = nnn
Display Hysteresis: on/off
Int Mode: fast/slow
Weighing Units Enabled: 'x' units, grams, ounces, pounds, troy ounces, pennyweights,
34
nnn g
n.n
n:nn AM, nn (month) (year) - if equipped with P/N 404625
Print: Dymo Setra 300, Auto Count or ScriptCoder
NET
TARE
GROSS
APW
ACCUM
PIECES
Dymo Setra 300 or Auto Count
TARE
GROSS
APW
ACCUM
PIECES
Parity: none/odd/even
carats
only if setup to print
"
"
"
"
only if setup to print
"
"
"
"
Setra Super Count
TM
Operator's Manual