Setra Systems Quick Count Operator's Manual

Hide thumbs Also See for Quick Count:

Advertisement

Introduction...........................................................1
Section One............................................................3
Installing Your Scale................................................3
SETUP..............................................................3
EXPERIMENTATION....................................................5
Section Two............................................................6
Understanding Your Scale.............................................6
KEYBOARD FUNCTIONS.................................................6
DISPLAY SYMBOLS....................................................6
MESSAGES...........................................................6
LED................................................................7
Section Three..........................................................8
Using Your Scale.....................................................8
BASIC WEIGHING.....................................................8
CONVERTING THE WEIGHING UNITS......................................8
WEIGHING WITH A CONTAINER..........................................8
BASIC COUNTING USING THE SAMPLE SIZE KEY...........................9
COUNTING WITH ACCURACY ENHANCEMENT................................10
REVERSE COUNTING OR KITTING.......................................12
PRINTING OUT INFORMATION..........................................13
INTERFACING WITH A COMPUTER.......................................13
Appendix I............................................................14
Set-Up Functions....................................................14
Appendix II...........................................................15
Calibration.........................................................15
Appendix III..........................................................16
Glossary of Terms...................................................16
Appendix IV...........................................................17
RS-232 Serial Data Communications...................................17
The RS-232 Interface Hardware.....................................17
Appendix V............................................................19
Accessories and Options.............................................19
Appendix VI...........................................................20
In Case of Difficulty...............................................20
Appendix VII..........................................................22
Battery Option......................................................22
INSTALLATION......................................................22
BATTERY USE FOR PORTABLE SCALE OPERATION..........................23
BATTERY CHARGING..................................................23
Appendix VIII.........................................................24
Specifications......................................................24
Appendix IX...........................................................26
Limited Two-Year Scale Warranty.....................................26
Index.................................................................27

Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Quick Count and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Setra Systems Quick Count

  • Page 1: Table Of Contents

    Table of Contents Introduction............1 Section One............3 Installing Your Scale..........3 SETUP..............3 EXPERIMENTATION............5 Section Two............6 Understanding Your Scale..........6 KEYBOARD FUNCTIONS..........6 DISPLAY SYMBOLS............6 MESSAGES............6 LED..............7 Section Three............8 Using Your Scale.............8 BASIC WEIGHING.............8 CONVERTING THE WEIGHING UNITS........8 WEIGHING WITH A CONTAINER..........8 BASIC COUNTING USING THE SAMPLE SIZE KEY......9 USING THE MINIMUM SAMPLE SIZE AND MINIMUM ACCURACY FEATURE..10 COUNTING WITH ACCURACY ENHANCEMENT........10 REVERSE COUNTING OR KITTING........12...
  • Page 3: Introduction

    For advanced programming of the Quick Count using an Auto Count™ 200 or PC, get a copy of the Setra Quick Count Technician's Guide by contacting your local authorized Setra dealer or call Setra toll free at 1-800-25- SETRA.
  • Page 4 Adjustable Foot Level Bubble Rectangular weighing platform shown is used on scales of 27 pound capacity Weighing Platform or more. Display Keypad Adjustable Foot Level Bubble FIGURE 1. Components and features of the Setra Quick Count. Setra Quick Count™ Operator's Manual...
  • Page 5: Section One

    Section One Installing Your Scale SETUP 1. Locating your scale The rugged design of your Setra Quick Count scale ensures that it will operate well typical factory office environments. Nonetheless, you should treat your scale as you would any piece of...
  • Page 6 The scale draws very little current from an outlet and may be left connected. This keeps your scale ready to use with no “ warm-up” time. Setra Quick Count™ Operator's Manual...
  • Page 7: Experimentation

    If you instruct the scale to do something it is not capable of doing, the scale will respond by displaying the message “ UnAbLE” . To continue experimenting, simply press the clear key. Setra Quick Count™ Operator's Manual...
  • Page 8: Section Two

    Displayed when the scale is powered on. “ nnn” equals the scale's full capacity in grams. bUSY The scale is waiting for a stable reading. UnAbLE scale unable complete your requested clear operation. Press select another operation. FLASHING Setra Quick Count™ Operator's Manual...
  • Page 9: Led

    (nnn) be removed to satisfy any minimum accuracy setup requirements. rEF n.n The scale is displaying the current software version number (n.n). low bat If lit, battery needs to be recharged. (Battery option only) Setra Quick Count™ Operator's Manual...
  • Page 10: Section Three

    3. Wait for the “ OK” symbol, then read the weight from the display. CONVERTING THE WEIGHING UNITS Your Quick Count scale is capable of weighing in any of the units listed in the DISPLAY SYMBOLS portion of this guide. To convert from one unit to another, simply press the units key.
  • Page 11: Basic Counting Using The Sample Size Key

    Press the print key to generate a tape/label or to transmit the data from the RS-232 port. ------------------------------------------------------------------------ sample 0.00 g zero count print clear size 6. Remove the pieces from the container and press the clear key to return the scale to the weight display. Setra Quick Count™ Operator's Manual...
  • Page 12: Using The Minimum Sample Size And Minimum Accuracy Feature

    Your scale has been preprogrammed at the factory with a minimum sample requirement of 10 pieces and a minimum accuracy requirement of 95%. If you wish to change these settings contact your local authorized Setra dealer or refer to the Setra Quick Count Technician's Guide.
  • Page 13 NOTE: The accuracy enhancement feature is disabled if the average piece weight has been scanned in from a bar code or entered via a computer. Setra Quick Count™ Operator's Manual...
  • Page 14: Reverse Counting Or Kitting

    7. Remove pieces until the display reads the number of pieces you wish to count out or kit. 8. Press the zero key. 9. Repeat Steps 7 and 8 as many times as needed. Setra Quick Count™ Operator's Manual...
  • Page 15: Printing Out Information

    NOTE: a. When using a printer other than the Setra 240P or 340P, set the baud rate and parity of your scale to match the printer (see Appendix I). b. It is possible to customize the information to be printed to either a dot matrix printer or thermal printer for bar codes ™...
  • Page 16: Appendix I

    Appendix I Set-Up Functions Your Setra Quick Count scale was programmed at the factory to operate in a prescribed manner. Many of the factory settings can be altered by an authorized Setra dealer to optimize scale performance for your counting or weighing operation.
  • Page 17: Calibration

    Appendix II Calibration Your Setra Quick Count scale is highly stable, and requires infrequent calibration. While it may be span calibrated as often as desired, the factory calibration is adequate for most counting applications. For precise weighing applications more periodic calibrations desirable.
  • Page 18: Appendix Iii

    A bit used to check the validity of the data word. PRECISION The degree of reproducibility which can be placed on an average value derived from multiple measurements usually expressed as one standard deviation (or one sigma). REPRODUCIBILITY See PRECISION. Setra Quick Count™ Operator's Manual...
  • Page 19: Appendix Iv

    (in back of scale) * If the fuse (Setra p/n 404722) is installed, power is provided for the Auto Count 200 bar code option or an intelligent bar code wand (p/n 403676), CCD or laser scanner on pin 6.
  • Page 20 Setra Quick Count Technician's Guide by contacting your local authorized Setra dealer. Setra Quick Count™ Operator's Manual...
  • Page 21: Appendix V

    Appendix V Accessories and Options The following accessories are available for the Setra Quick Count. Ask your dealer for current price information and/or a demonstration. Part Number Description 401150 240P PRINTER - 40 column dot matrix tape printer comes pre- interfaced to Setra scales and balances.
  • Page 22: Appendix Vi

    Appendix VI In Case of Difficulty Setra Quick Count scales are designed to be easy to use. If, however, you have reached a state in which the scale will no longer follow your instructions, you may wish to “ reset”...
  • Page 23 Setra Quick Count Technician's Guide or consult Appendix IX, “ Limited Two-Year Scale Warranty,” for more information. To obtain a copy of the Setra Quick Count Technician's Guide contact your local authorized Setra dealer. Setra Quick Count™ Operator's Manual...
  • Page 24: Appendix Vii

    8. Slide the battery halfway into the scale, attach the battery clip, then insert the battery completely into the scale. 9. Slide the battery door closed and the scale is now powered for portable operation. Figure 2. Installing the Battery Option. Setra Quick Count™ Operator's Manual...
  • Page 25: Battery Use For Portable Scale Operation

    1. Plug the AC adaptor, (Setra part number 404712) into an electrical outlet, and plug the power cable into the scale. Do not remove the battery.
  • Page 26: Appendix Viii

    Counting Capacity: 999,999 pieces * Contact your authorized Setra dealer to change settings or refer to the Setra Quick Count Technician's Guide. Data Communications: Bi-directional RS-232 Selectable Baud Rates*: 300, 600, 1200, 2400,...
  • Page 27 Quick Count - 1000g - 5000g: 26 lb. (12.0 Kg) Quick Count - 12,500g - 50,000g: 32 lb. (13.5 Specifications subject to change without notice. * Contact your authorized Setra dealer to change settings or refer to the Setra Quick Count Technician's Guide. Setra Quick Count™ Operator's Manual...
  • Page 28: Appendix Ix

    Appendix IX Setra Systems, Inc. Limited Two-Year Scale Warranty Setra Systems, Inc. warrants the scales it manufactures to be free from defects in material and workmanship. Upon return, transportation charges prepaid, Setra’s factory within years date purchase, Setra will repair or replace, at its option, any scale which...
  • Page 29: Index

    17 battery backed, 17 messages, 1, 17 minimum accuracy, 6, 9, 10, 12 minimum sample size, 9, 10, 12, 21 model, 4, 22 non-linearity, 21 OFLO, 6 OK, 5, 7, 9 ounces, 5, 7, 21 Setra Quick Count™ Operator's Manual...
  • Page 30 ScriptCoder, 11, 12, 15, 16 self-diagnostics, 4 serial port, 15 service, 17 Setra Quick Count Technician's Guide, 1, 7, 9, 11, 12, 13, 15, 18, 21, settings, 9, 12, 21 Printer, 12 setup information, 12, 17 software version number, 4, 6...
  • Page 31 Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at their own expense. Setra Quick Count™ Operator's Manual...

Table of Contents

Save PDF