Port Address Table - HP J3245A Installation And Configuration Manual

Monitoring and Analyzing Switch Operation from the Console
Status and Counters Menu

Port Address Table

This screen lets you easily determine which devices are attached to the
selected switch port by listing all of the MAC addresses detected on that port.
You can use the Search action at the bottom of the screen to determine
whether a specific device (MAC address) is connected to the selected port.
To use the port address table:
1.
Figure 4-7. Example of How To Access the Port Address Table
2.
4-8
Select Port Address Table from the menu in the Status and Counters
screen.
When the Select Port prompt appears, press the Space bar to display
the port you want to examine, then press [Enter]. (See figure 4-7, above.)
Each port is identified by the sequential port numbers on the front of the
switch.
Use the Space bar to select the port for
which you want to display the address table.