HP J3245A Installation And Configuration Manual page 104

Using the Advanced Commands
Commands
Command Syntax
vlan vlan_name
where:
vlan_name is the name of the
virtual LAN you want to access.
clearled
config
delete
getmib objectname.index
where:
objectname identifies the MIB
object by name or number format.
index identifies the instance of
each object name.
setmib objectname.index type value
where:
objectname identifies the MIB
object by name or number format.
index identifies the instance of
each object name.
type
value identifies the numeric value for
the MIB object.
6-6
Description
Used where VLANs are configured. Used to select a different VLAN
environment in which to execute Command Prompt commands. The command
prompt will change to show the VLAN name specified by the vlan_name
parameter.
Turns off the Security LED on the front panel of the Switch 800T.
Displays the configuration currently saved in flash memory. When
— MORE — is displayed, pressing [Enter] displays the next line of the
configuration, and pressing the Space bar displays the next screen of the
configuration. To halt a config listing and return to the command line prompt,
press [Q].
Deletes the configuration file currently in use, returns the switch to its factory
default configuration, and reboots the switch.
Retrieves the value of an individual MIB object in the switch.
Example: The following command returns the enable/disable status for a port
having a port ID of 1. (For an example of port ID numbering, see the example
of the Port Status screen on page 4-4.)
getmib ifAdminStatus.1
Sets a MIB object to a specific value. Valid types are:
-i (integer) -g (gauge)
-o (octet) -t (time_ticks)
-d (object identifier) -u (unsigned integer 32)
-a (ip_addr) -D (Display String)
-c (counter) -N (NULL)
Example: This command sets port 1 to disabled status.
setmib ifAdminStatus.1 -i 2