HP J3245A Installation And Configuration Manual page 116

Advanced Concepts
Filters and Security
N o t e
If a node designated by the Source MAC parameter is moved to a different port
than its original source port, any traffic to or from that node will not be
forwarded by the switch. Forwarding will resume if the node is moved back
to the original source port.
Traffic between ports not designated as a "Source Port" is not affected by the
filter.
How To Configure Traffic/Security Filters: Use this procedure to spec-
ify the type of filters to use on the switch and whether to forward or drop
filtered packets for each filter you specify. You can create up to fifty filters.
1.
2.
Figure 7-5. The Traffic/Security Filters List Screen (Default Values)
3.
7-10
From the Main menu, select Configuration.
In the Configuration menu, select Traffic/Security Filters to
display the following screen.
In the Actions line, press [A] (for Add) to display the Traffic/Security
Filters Configuration screen shown in figure 7-6.