HP J3245A Installation And Configuration Manual page 89

Monitoring and Analyzing Switch Operation from the Console
Status and Counters Menu
You can also display the port status of the individual multicast groups. (That
is, you can display the ports, port types, and whether the IGMP devices
connected to the switch via the port are hosts, routers, or both.) To do so,
select the group from the above screen and press [S] for Show ports. For
example, suppose you wanted to view the status of the IP multicast group
227.111.122.122 shown in the above screen. You would highlight the row
beginning with that group number, then press [S]. You would then see a screen
similar to the following:
Figure 4-12. Example of an IGMP Status Screen for a Selected Multicast Group
4-13