HP J3245A Installation And Configuration Manual page 7

Preface
Use of This Guide and Other Switch 800T
Documentation
This guide describes how to install the Switch 800T (HP J3245A) in your
network and use the console interface for the HP AdvanceStack Switch 800T
(hereafter referred to as the "Switch 800T").
Important! Before installing or removing a transceiver module, refer to the
specific transceiver module documentation describing these procedures.
If you need information on specific parameters in the console interface,
refer to the online help provided in the interface.
If you need further information on Hewlett-Packard switch technology,
refer to the HP AdvanceStack Products CD shipped with your Switch
800T.
Preface
iii